Activities
The 4th International Symposium (2019/11/24-26)
Location:
Nagoya University, Nagoya, Japan
Kobori Research Complex Inc., Tokyo, Japan



Technical Session Program:
Keiichi Araki (Nagoya University)
Recent progress in development of super elastic Cu and Fe based SMAs for improving seismic resiliency of built environment
Yoshikazu Sawamoto (Kajima Technical Research Institute)
Introduction of Technology of Kajima Corp.
Jun Kubota (Kajima Technical Research Institute)
Analysis of 18-story steel moment frame on shaking table test under long period ground motion
Yoshitaka Suzuki (Kobori Research Complex Inc.)
Introduction of Kobori research complex (KRC) and recent research project
Ippei Maruyama (Nagoya University)
Current research development on structural components for long-term operation of nuclear power plants
Jiulin Li (Beijing Urban Construction Group Co., Ltd.)
Smart construction in China
Keiichi Araki (Nagoya University)
Recent progress in development of super elastic Cu and Fe based SMAs for improving seismic resiliency of built environment
Yoshikazu Sawamoto (Kajima Technical Research Institute)
Introduction of Technology of Kajima Corp.
Jun Kubota (Kajima Technical Research Institute)
Analysis of 18-story steel moment frame on shaking table test under long period ground motion
Yoshitaka Suzuki (Kobori Research Complex Inc.)
Introduction of Kobori research complex (KRC) and recent research project
Ippei Maruyama (Nagoya University)
Current research development on structural components for long-term operation of nuclear power plants
Jiulin Li (Beijing Urban Construction Group Co., Ltd.)
Smart construction in China
Keynote Lecture:
Masayoshi Nakashima (Kobori Research Complex Inc.)
Quater-century efforts in Japan toward resilient society
Masayoshi Nakashima (Kobori Research Complex Inc.)
Quater-century efforts in Japan toward resilient society
Main Program:
Xiaodong Ji (Tsinghua University)
Computer vision-based post-earthquake damage and performance estimation
Noriyuki Takahashi, Hiroyuki Chida and Yizhe Wang (Tohoku University)
Seismic damage evaluation of timber house exterior wall with CNN and image processing
Zuozhou Zhao (Tsinghua University)
State-of-the-art studies on the behavior of coupling beams
Taichiro Okazaki (Hokkaido University)
Hokkaido research in steel structures
Yu-Lin Chung (National Cheng-Kung University)
Seismic performance evaluation of the self-centering column bases
Peng Pan (Tsinghua University)
RSSA using deep neural network (RSSA: Rapid Structural Safety Assessment)
Ryota Matsui (Hokkaido University)
Summary of deterioration modeling for steel structure
Xuchuan Lin (IEM)
Real-time structural health monitoring and simulation of seismic responses in cities
Collapse simulation of high-rise steel buildings
Takuya Nagae (Nagoya University)
Assessment of a curtain wall system used in high-rise buildings and development of a monitoring method
Ippei Maruyama (Nagoya University)
Change in structural performance of concrete due to drying and its mitigation method
Xiaodong Ji (Tsinghua University)
Computer vision-based post-earthquake damage and performance estimation
Noriyuki Takahashi, Hiroyuki Chida and Yizhe Wang (Tohoku University)
Seismic damage evaluation of timber house exterior wall with CNN and image processing
Zuozhou Zhao (Tsinghua University)
State-of-the-art studies on the behavior of coupling beams
Taichiro Okazaki (Hokkaido University)
Hokkaido research in steel structures
Yu-Lin Chung (National Cheng-Kung University)
Seismic performance evaluation of the self-centering column bases
Peng Pan (Tsinghua University)
RSSA using deep neural network (RSSA: Rapid Structural Safety Assessment)
Ryota Matsui (Hokkaido University)
Summary of deterioration modeling for steel structure
Xuchuan Lin (IEM)
Real-time structural health monitoring and simulation of seismic responses in cities
Collapse simulation of high-rise steel buildings
Takuya Nagae (Nagoya University)
Assessment of a curtain wall system used in high-rise buildings and development of a monitoring method
Ippei Maruyama (Nagoya University)
Change in structural performance of concrete due to drying and its mitigation method
The 3rd International Symposium (2019/5/23-24)
Location:
Tsinghua University, Beijing, China

Preliminary Session Program:
Xiaodong Ji (Tsinghua University)
Current status of this research project from Chinese side
Taichiro Okazaki (Hokkaido University)
Current status of this research project from Japanese side
Noriyuki Takahashi (Tohoku University)
Past and future of digital image process for seismic crack evaluation in Japan
Yuki Mimizuka (Tohoku University)
Damage estimation of RC wall by modified compression field theory and geometric deformed model
Hiroyuki Chida (Tohoku University)
Usage of deep learning for image diagnosis of wooden houses and damage estimation based on full-scale experiment
Zenghui Miao and Yuncheng Zhuang (Tsinghua University)
Semantic segmentation for damage on RC components
Xiaodong Ji (Tsinghua University)
Current status of this research project from Chinese side
Taichiro Okazaki (Hokkaido University)
Current status of this research project from Japanese side
Noriyuki Takahashi (Tohoku University)
Past and future of digital image process for seismic crack evaluation in Japan
Yuki Mimizuka (Tohoku University)
Damage estimation of RC wall by modified compression field theory and geometric deformed model
Hiroyuki Chida (Tohoku University)
Usage of deep learning for image diagnosis of wooden houses and damage estimation based on full-scale experiment
Zenghui Miao and Yuncheng Zhuang (Tsinghua University)
Semantic segmentation for damage on RC components
Main Program:
Zuozhou Zhao (Tsinghua University)
Axial compression behavior of the high-strength concrete squat wall with distributed steel tubes
Ryota Matsui (Hokkaido University)
Numerical simulation of dynamic response and collapse of steel structures considering fracture of members
Yao Cui (Dalian University of Technology)
Design concepts and behavior of ductile linked rocking steel frames
Xuchuan Lin (IEM)
Study of seismic structures based on high-strength steel and fuses over the past decade
Weibiao Yang (Beijing Institute of Architectural Design)
Research on China Zun Tower structure design and construction introduction
Shohei Yamada (Nikken Sekkei Ltd.)
Process of steel structure design in Japan
Lijun Wang (Huachengboyuan Ltd.)
Seismic design for a high-rise structural steel building with damping system
Mikiko Kato (Nikken Sekkei Ltd.)
Akasaka Center Building: Structural design and steel fabrication
Taichiro Okazaki (Hokkaido University)
Characteristic features of Japanese steel buildings
Peng Pan (Tsinghua University)
Development of a double stage yield BRB (DYB)
Ippei Maruyama (Nagoya University)
Impact of drying on concrete and concrete structures
Shelly Zhang (University of Illinois at Urbana-Champaign)
Stochastic methods for topology optimization of structures under many load cases
Takuya Nagae (Nagoya University)
System level tests on seismic performance of office buildings and residential buildings
Xiaodong Ji (Tsinghua University)
Innovative coupled wall systems for high-rise buildings
Noriyuki Takahashi (Tohoku University)
Past and future of digital image process for seismic crack evaluation in Japan
Zuozhou Zhao (Tsinghua University)
Axial compression behavior of the high-strength concrete squat wall with distributed steel tubes
Ryota Matsui (Hokkaido University)
Numerical simulation of dynamic response and collapse of steel structures considering fracture of members
Yao Cui (Dalian University of Technology)
Design concepts and behavior of ductile linked rocking steel frames
Xuchuan Lin (IEM)
Study of seismic structures based on high-strength steel and fuses over the past decade
Weibiao Yang (Beijing Institute of Architectural Design)
Research on China Zun Tower structure design and construction introduction
Shohei Yamada (Nikken Sekkei Ltd.)
Process of steel structure design in Japan
Lijun Wang (Huachengboyuan Ltd.)
Seismic design for a high-rise structural steel building with damping system
Mikiko Kato (Nikken Sekkei Ltd.)
Akasaka Center Building: Structural design and steel fabrication
Taichiro Okazaki (Hokkaido University)
Characteristic features of Japanese steel buildings
Peng Pan (Tsinghua University)
Development of a double stage yield BRB (DYB)
Ippei Maruyama (Nagoya University)
Impact of drying on concrete and concrete structures
Shelly Zhang (University of Illinois at Urbana-Champaign)
Stochastic methods for topology optimization of structures under many load cases
Takuya Nagae (Nagoya University)
System level tests on seismic performance of office buildings and residential buildings
Xiaodong Ji (Tsinghua University)
Innovative coupled wall systems for high-rise buildings
Noriyuki Takahashi (Tohoku University)
Past and future of digital image process for seismic crack evaluation in Japan
The 2nd International Symposium (2018/11/21-25)
Location:
Hokkaido University, Sapporo, Japan

Program:
Akiri Seki (Hokkaido University)
Cyclic loading behavior of steel chevron braced frames with I-section braces
Dias Ilanildo (Hokkaido University)
Numerical simulations on the cyclic loading behavior of steel chevron Braced Frames
Shaoqi Yang, Shuhei Uesugi (Hokkaido University)
Report on The 2018 Hokkaido Eastern Iburi Earthquake
Yuka Nagai (Hokkaido University)
An experimental study on the application of adhesively bonded joints
Takuya Nagae (Nagoya University)
Fantastic story for the future China-Japan joint research
Peng Pan (Tsinghua University)
An introduction of researches in PP group
Xiaodong Ji (Tsinghua University)
Innovative components & systems for enhanced seismic resiliency of high-rise buildings
Xuchuan Lin (IEM)
Research efforts on the collapse simulation of E-defense 1/3-scale high-rise steel buildings
Ryota Matsui (Hokkaido University)
Investigations on seismic performance of steel frames and components using simple stick models
Kazutaka Shirai (Hokkaido University)
Recent Activities
Zuozhou Zhao (Tsinghua University)
Behavior of assembled shear wall structures and lightweight block composite wall structures
Zenghui Miao (Tsinghua University)
Applications of computer vision for analysis on RC walls
Hongyang Sun (Tsinghua University)
Simlation for shake table test of a full-scale 4-story RC building
Herath Hashini (Hokkaido University)
Numerical analysis of highrise buildings subjected to long duration earthquakes
Katsuhiro Aoyagi (Hokkaido University)
Dynamic Loading Tests of Steel Beam-to-Column Connections
Hiroyuki Chida (Tohoku University)
Using deep learning for damage assessment of wooden houses
Noriyuki Takahashi (Tohoku University)
Simplified method for damage evaluation focused on a cracking space
Assessment of crack propagation mechanism based on the digital image correlation
Recent topics for anti-tsunami structural design of buildings
Hiroshi Sasano (Nagoya University)
Strength and Young's modulus change in concrete due to long-term drying and heating
Akiri Seki (Hokkaido University)
Cyclic loading behavior of steel chevron braced frames with I-section braces
Dias Ilanildo (Hokkaido University)
Numerical simulations on the cyclic loading behavior of steel chevron Braced Frames
Shaoqi Yang, Shuhei Uesugi (Hokkaido University)
Report on The 2018 Hokkaido Eastern Iburi Earthquake
Yuka Nagai (Hokkaido University)
An experimental study on the application of adhesively bonded joints
Takuya Nagae (Nagoya University)
Fantastic story for the future China-Japan joint research
Peng Pan (Tsinghua University)
An introduction of researches in PP group
Xiaodong Ji (Tsinghua University)
Innovative components & systems for enhanced seismic resiliency of high-rise buildings
Xuchuan Lin (IEM)
Research efforts on the collapse simulation of E-defense 1/3-scale high-rise steel buildings
Ryota Matsui (Hokkaido University)
Investigations on seismic performance of steel frames and components using simple stick models
Kazutaka Shirai (Hokkaido University)
Recent Activities
Zuozhou Zhao (Tsinghua University)
Behavior of assembled shear wall structures and lightweight block composite wall structures
Zenghui Miao (Tsinghua University)
Applications of computer vision for analysis on RC walls
Hongyang Sun (Tsinghua University)
Simlation for shake table test of a full-scale 4-story RC building
Herath Hashini (Hokkaido University)
Numerical analysis of highrise buildings subjected to long duration earthquakes
Katsuhiro Aoyagi (Hokkaido University)
Dynamic Loading Tests of Steel Beam-to-Column Connections
Hiroyuki Chida (Tohoku University)
Using deep learning for damage assessment of wooden houses
Noriyuki Takahashi (Tohoku University)
Simplified method for damage evaluation focused on a cracking space
Assessment of crack propagation mechanism based on the digital image correlation
Recent topics for anti-tsunami structural design of buildings
Hiroshi Sasano (Nagoya University)
Strength and Young's modulus change in concrete due to long-term drying and heating
The 1st International Symposium (2018/05/21-25)
Location:
Tsinghua University, Beijing, China

Program:
Taichiro Okazaki (Hokkaido University)
Exploring possibilities of structural steel
Peng Pan (Tsinghua University)
Development of innovative devices for controlling seismic responses of building structure
Takuya Nagae (Nagoya University)
Possible joint research topics for the practical China-Japan crew members
Tao Wang (IEM)
Probability-based seismic performance assessment method for substation systems
Noriyuki Takahashi (Tohoku University)
Digital image processing in experimental field and in earthquake reconnaissance
Zuozhou Zhao (Tsinghua University)
Seismic behaviour of low-rise rural residence buildings made of different materials
Hiroshi Sasano (Nagoya University)
Impact of drying on structural performance of reinforced concrete shear wall
Xuchuan Lin (IEM)
Damage control, identification, monitoring and repair of steel structures based on high-strength steel and fuses
Edoardo Marino (University of Catania)
Achieving a more effective concentric braced frame by the double-stage yield BRB
Xiaodong Ji (Tsinghua University)
Creating innovative structural systems for high-rise buildings
Taichiro Okazaki (Hokkaido University)
Exploring possibilities of structural steel
Peng Pan (Tsinghua University)
Development of innovative devices for controlling seismic responses of building structure
Takuya Nagae (Nagoya University)
Possible joint research topics for the practical China-Japan crew members
Tao Wang (IEM)
Probability-based seismic performance assessment method for substation systems
Noriyuki Takahashi (Tohoku University)
Digital image processing in experimental field and in earthquake reconnaissance
Zuozhou Zhao (Tsinghua University)
Seismic behaviour of low-rise rural residence buildings made of different materials
Hiroshi Sasano (Nagoya University)
Impact of drying on structural performance of reinforced concrete shear wall
Xuchuan Lin (IEM)
Damage control, identification, monitoring and repair of steel structures based on high-strength steel and fuses
Edoardo Marino (University of Catania)
Achieving a more effective concentric braced frame by the double-stage yield BRB
Xiaodong Ji (Tsinghua University)
Creating innovative structural systems for high-rise buildings